Freedom 20kwh Lithium Battery 20/16 Low Voltage

Description

Aluminium enclosure painted white, for use indoors or fully protected under-cover environments, rated to IP20 Shunt Trip Circuit Breaker sized to suit max current, can be tripped by BMS if critical fault, manual reset. Includes overcurrent, cell under and over voltage, temperature, weak cell detection, minimum SoC control USB Serial protocol for troubleshooting & RJ45 for BMS & inverter communication State of Charge display (0 to 100%), Error light, Error Reset button, USB plug for programming 10 years or 4 000 cycles for average 80% DoD, and max 90% DoD >16 years (>5 500 cycles) expected life at 80% DoD 1 >20 years (>7 500 cycles) at 50% DoD Note that for connecting the battery to a PC a USB “printer” cable is required (one is supplied with each battery), CAN Bus Termination Resistor – one required per battery (one included with battery), CAN Bus cable (RJ45 LAN cable) – one required per battery (not supplied with battery). Note some inverters will require a special (non-standard pin configuration) cable – see installation manual.